From: eLinux.org
The Banana Pi is an open source computer capable of running Linux and Android 4.4. It has an AllWinner A20 SoC with 1GB of memory and a dual core ARM CPU.
| CPU | A20 ARM® Cortex™-A7 Dual-Core |
| GPU | ARM Mali400MP2 Complies with OpenGL ES 2.0/1.1 |
| Memory (SDRAM) | 1GB DDR3 (shared with GPU) |
| Onboard Storage | SD (Max. 64GB) / MMC card slot UP to 2T on SATA disk |
| Onboard Network | 10/100/1000 Ethernet RJ45 (optional USB WIFI Dongle) |
| Camera Input | A CSI input connector allows for the connection of a designed camera module |
| Sound Input | Mic |
| Video Outputs | HDMI, CVBS , LVDS/RGB |
| Audio Output | 3.5 mm Jack and HDMI |
| Power Source | 5 volt via MicroUSB(DC In Only) and/or MicroUSB (OTG) |
| USB 2.0 Ports | 2 (direct from Allwinner A20 chip) |
| Buttons | Reset button: Next to MicroUSB connector
Power button: Next to Reset button UBoot button (optional): Behind HDMI connector |
| GPIO(2X13) pin | GPIO,UART,I2C bus,SPI bus with two chip selects,CAN bus,ADC,PWM,+3.3v,+5v,ground. |
| LED | Power Status LED (Red)
Ethernet Status LED (Blue) User Define LED (Green) |
| Remote | IR |